How it works
How it works in images
|1. The indoor air is full of particles that come from yourself, your surroundings and your daily activities such as bacteria, virus, mold, pollen, car exhaust, dust, etc|
|2. Lightair IonFlow 50 generates billions of electrons per second that transforms into negative ions.|
|3. The negative ions charge the particles in the air negatively|
|4. Once the particles have been negatively charged they are attracted by the positively charged collector which essentially acts like a large magnet for dirt. IonFlow 50 is especially effective in removing the smallest particles in the air, which are considered the most hazardous to our health.|
|5. The collector will become dirty on the outside. How dirty and how fast depends on how polluted the environment is where it is placed.|
|6. When necessary, the collector can be easily removed, rinsed in water and then reused.|
How it works in detail
Lightair IonFlow 50 generates from the three corona needles billions of electrons per second that transforms into negative ions when they come in contact with the oxygen molecules in the air. The production of electrons results in a concentration of more than 250.000 negative ions per cm3 measured from one meter distance, which is, as far as we know, more than any other ionizing air purifier has ever attained before without serious side effects such as generation of unhealthy levels of ozone.
The IonFlow technology uses two pole ionizing technique. By using 110V or 220V and very low strength of current 50 mA and an effect of only 7W the technology is capable through a cascade of diodes and capacitors to accelerate an extremely high voltage of more than 200.000 eV. This enables the extremely high production of several billion electrons per second, meaning several billion negative ions per second. Consequently the particle reduction is massive as the number of ions produced at a certain time corresponds to number of particles charged and collected in a certain time.
The enormous production of ions makes it possible to effectively distribute the negative charge into all corners of a room, which means that the air in the entire room will be cleaned from particles not only the air closest to the device.
The negative ions attach to the positively charged pollution particles in the air, such as from dust, pollen allergens, smoke, car fumes, pat dander, bacteria, mould, viruses etc. It is especially effective in removing the smallest particles in the air, usually referred to as fine particles. These are considered the most hazardous to our health. The collector will be covered by particles and slowly change color as it becomes more and more dirty. When necessary, the collector can easily be removed and washed clean in water and washing-up liquid. Larger clusters of particles will fall to the floor before being removed by regular vacuum cleaning.
The positive charge that can be felt when touching the collector is far below the safety threshold value and is necessary to attain the strong attraction of particles. It is completely harmless!
The generation of electrons and thus the production of negative ions continuously charge particles in the air. This process takes some time depending on the size of the room. When all the particles in the room are charged the generation of electrons decrease and the units starts to generate only as many electrons as is needed to charge the new particles that constantly enters the room. The room will stay relatively cleaner at all time as long as the air purifier is turned on.